20
G-Sensor:
Adjust the sensitivity of the G-Sensor.
Available options:
Disable / Low (default) / Medium / High
Speed Unit:
Set the measurement unit of speed.
Available options:
km/h (default) / mph
Lane Departure:
Alert the driver when the vehicle veers out of a lane. This function is
activated when the driving speed exceeds the value set ahead.
Available options:
Disable (default) / >60 km/h ~ 150 km/h (40 mph~85 mph)
Forward Collision:
Alert the driver when the vehicle is getting too close to the car ahead.
This function is activated when the driving speed exceeds the value set ahead.
Available options:
Disable (default) / 60 kmh ~150 kmh (40 mph~85 mph)
Speed Alarm:
Alert the driver with warning beeps if the driving speed exceeds the value
set ahead.
Available options:
Disable (default) / 60 kmh (40 mph) / ... / 150 kmh (85 mph)
Parking Mode:
Determine if continuous recording is necessary according to motion
detection after the car engine is switched off
(this mode will drain DrivePro’s battery).
Available options:
Enable / Disable (default)
Delay Power Off:
Schedule the DrivePro to shut down at a certain time.
Available options:
Disable / 10 secs (default) / 30 secs
Auto Display Off:
Set duration for display to automatically turn off after recording begins.
Available options:
Never (default) / After 1 min / After 3 mins
Note:
Auto Display Off is disabled when Speed Alarm, Forward Collision, Lane Departure,
Headlight Reminder, Driver Fatigue Alert, or Head-Up Display is enabled.
GPS Status:
Display the number of GPS satellites received and GPS signal intensity.
Navigation System:
Select a navigation system according to your preference.
Available options:
GPS (default) / GLONASS
Headlight Reminder:
When the DrivePro detects poor lighting conditions, the headlight
reminder will automatically activate.
Available options:
Disable (default) / Enable
Driver Fatigue Alert:
Remind the driver of the need to rest after driving for a preset,
driver-determined period of time.
