TransAct RESPONDER MP2, Быстрый старт

Страница: 20 / 39

100-13809 - Rev B
Page - 12 -
Unpack the Printer
Be sure to save the box and packing materials in case you need to send the
printer in for service. TransAct Technologies is not responsible for damaged
return items that are not packaged in original shipping material. Refer to
“Return Materials Authorization and Return Policies”, on page 3 for information
on what to do if you have to return your printer for repair.
Set Up the Printer
If vehicle or other DC power is being used to power the printer, plug the power
cord into the power port at the top left rear of the printer, as shown in the
figure.
Note: The printer supports a wide range of input DC voltage (12V-28V)
without the need for special configuration, allowing it to be used directly with
either 12-volt or 24-volt vehicle power systems.
Power port
USB port