1. PRECAUTION
The
Marine Salt testa
is for the sole purpose of measuring the
Temperature, Salinity and Specific Gravity of natural seawater and /
or synthetic seawater. This meter has been factory calibrated and
performance tested to ensure accurate readings.
Please read the entire operation manual before using this
Marine
Salt testa
. Failure to read this manual prior usage may result in
equipment damage and will void the warranty.
1.1 Notes on safety
Please keep this product away from children. Ingestion of small
parts may lead to choking and serious injury. If the sensor
protection cap or battery is ingest; please consult a physician
immediately.
Be careful not to scratch the surface of the platinum-plated
sensors.
Do not use chemicals such as acetone or benzene for cleaning as
it may cause deterioration of the plastic housing.
Never attempt to disassemble or modify this product, this will void
warranty.
1.2 Notes during measurement
Always rinse the Probe Sensor before and after each test.
Make sure sensor do not contact any of the walls of the
aquarium or sump while in measurement mode. Keep sensors
at least 1cm away from all sides and bottom of the measuring
container.
1.3 Notes on storage
Avoid keeping
Marine Salt testa
in high humidity environments,
direct exposure to sunlight, high temperatures, dust and
moisture to prevent damage.
Please keep sensor cap in-place to protect the sensors when not
in use.
Always remove the batteries if tester is not use over a long
period of more than one month.
!!!!
!!!!
!!!!
