econnecting your device
rn off the Bluetooth feature on you iPad/iPhone/iPod
ect,
dding a new phone or tablet
：
e to another, please follow these steps
h as
to connect a new device.
ut of range or lost signal:
device away from receiver (33 feet) or there is
som
re’s a
tion is lost for more than 15 seconds, you need to reconnect the
R
If you move out of range or tu
touch or Smartphone, BTR-1002N will be disconnected from your device. To reconn
simply open the Bluetooth manager and tap on the “Music Receiver”, then you do not
need to input PIN again, the connection will be done automatically.
A
If you want to switch from one devic
1.
End the existing Bluetooth connection with connected device.
2.
The BTR-1002N can now be connected with another device suc
iPad/iPod/iPhone or Smartphone or tablet.
3.
Follow the section “Pairing the BTR-1002N”
O
When the paired phone or
ething blocking the Bluetooth signal. The LED light will go off, it means the
connection between device and BTR-1002N is lost. To avoid a lost connection:
1.
Move the music device back into range ( within 33 feet), and make sure the
clear line of sight and there are no obstructions between BTR-1002N and device.
2.
Within 15 seconds, the connection will automatically be reestablished and LED
will turn on
3.
If the connec
device and BTR-1002N again. Please follow the “Reconnect Your Device”
section.
Indication of LED
9
Indication meaning
Description
Flash once 1 sec
nnection
per 5 secs
Power on
/Pairing
Waiting for co
Permanent Lighted
Device and main unit are connected
connected
