www.tranquilmount.co.uk
5 of 8
Installation of the bracket
Measure the centreline of the mantle. Mark with tape on
the wall.
S1
S2
S4
Locate at least two studs with a stud finder. Locate the
centre of these studs by using a sharp awl or finish nail
poked through the drywall to locate each edge. Lag bolts
must be installed into the CENTRE of the studs.
CL
CL
Reference point 5 at page 4 to punch, please
make sure that the four mounting holes don't have
too big deviation.
S3
Cutout shown
for reference
CL
CL
CL
4mm
CUTAWAY VIEW
INCORRECT
CORRECT
wall plate
plaster/
dry wall
concrete
wall plate
concrete
plaster/
dry wall
Reference point 5 at page 4 to punch, if the main
wall is concrete or brick wall, you must use the expansion
pipe we provided in M.
CL
CL
CL
plywood wall
wood stud wall
CL
CAUTION
CAUTION
Do not drill into mortar joints!
(68mm)
(10mm)
(68mm)
(4mm)
CL
10mm
M
In order to have a better installation, it is necessary
to have in-wall wiring or wall AV and power plates
installed to hide the cords behind the wall. We
advise you get a professional installer to do this.
145mm
（
5.7”
）
145mm
（
5.7”
）
50mm
（
1.97”
）
