6 of 8
Installation of the bracket
Take out CC/AA/E/N from the packaging , Select the app-
ropriate hole position according to the actual needs, and
lock it as shown in the figure
.
Take out A/L from the packaging ,Use A to ensure insta-
llation level, let the pre-set wire go through the hole as
illustrated in the picture.
S5
S6
Take out E/N/EE from the packaging ,lock the four allen pan
head screws(M8x10) with Hexagon wrench in E , as is shown
in the pictures below.
Take out B/D/DD/FF from the packaging ,lock the two
socket heal screws(M6x80) with Hexagon wrench in E,
Complete these steps in sequence(1
→
2
→
3), finally,Put
the harness in place, as is shown in the pictures below.
S7
S8
1
2
2
3
L
A
(magentic spirit level)
E
(Hexagon wrench)
EE
(bracket)
(screw M8x10)
E
(Hexagon wrench)
B
(Socket heal screw)
D
(Hook block slice)
FF
DD
(beam)
E
(Hexagon wrench)
CC
(wallboard)
AA
(wallboard connection)
N
(screw M8x10)
N
CAUTION
Don't over tighten!
In order to install more beautiful,
the power adapter should be pla-
ced inside of the wall.
