Trane WC*150B***G Series Скачать руководство пользователя | Manualshive

Страница: 58 / 60

background image

58

Packaged Heat Pump •

WC-IOM-7

Warranty

Heat Pump

Standard Equipment Warranty Terms and Conditions

Commercial Equipment Warranty and Liability

Models Larger that 20 Tons for Commercial Use*

The Company warrants for a period of 12 months from initial start-up or 18
months from date of shipment, whichever is less, that the Company products
covered by this order (1) are free from defects in material and workmanship and
(2) have the capacities and ratings set forth in the Company’s catalogs and
bulletins, provided that no warranty is made against corrosion, erosion or
deterioration.

The Company’s obligations and liabilities under this warranty are limited to
furnishing f.o.b. factory or warehouse at Company designated shipping point,
freight allowed to Buyer’s city (or port of export for shipment outside the
conterminous United States) replacement equipment (or at the option of the
Company parts therefore) for all Company products not conforming to this
warranty and which have been returned to the manufacturer.

The Company shall not be obligated to pay for the cost of lost refrigerant. No
liability whatever shall attach to the Company until said products have been paid
for and then said liability shall be limited to the purchase price of the equipment
shown to be defective.

The Company makes certain further warranty protection available on an optional
extra-cost basis. Any further warranty must be in writing, signed by an officer of
the Company.

The warranty and liability set forth herein are in lieu of all other warranties and
liabilities, whether in contract or in negligence, express or implied, in law or in
fact, including implied warranties of merchantability and fitness for particular
use. In no event shall the Company be liable for any incidental or consequential
damages.

Trane

2701 Wilma Rudolph Blvd.

Clarksville, TN 37040-1008

Attention: Manager,Product Service

«
...
56
57
58
59
60
»

Содержание WC*150B***G Series





























































Отзывы:

Нет отзывов

Похожие инструкции для WC*150B***G Series

Бренд: Accorroni Страницы: 40

Бренд: Gardena Страницы: 13

Бренд: WarmFlow Страницы: 89

Бренд: Patterson Страницы: 16

Бренд: MCS Master Страницы: 203

Бренд: P.Lindberg Страницы: 54

Бренд: Aktobis Страницы: 6

Бренд: Watts Страницы: 22

Бренд: Graco Страницы: 32

Бренд: Fairland Pioneer Страницы: 36

Бренд: SAER Elettropompe Страницы: 44

Бренд: Waters Страницы: 101

Бренд: Holmes Страницы: 2

Бренд: samhydraulik Страницы: 7

ACT Signature Series

Бренд: Aqua Comfort Страницы: 2

Super T T6C60SC-B

Бренд: GORMAN-RUPP PUMPS Страницы: 38

Бренд: Barnes Страницы: 27

Бренд: DAB Страницы: 292

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды