Trane Odyssey BAYFILT001, Руководство по установке, Страница: 6 / 8

6 ACC-SVN218B-EN
Installation for 12.5-25 Ton Air
Handlers
1. Refer to parts list for corresponding unit model and
correct part number/quantity.
2. Locate kit label and place next to an open spot near
the nameplate. See Figure 7, p. 6 .
Figure 7. Panel removal and label location
3. From pic shown direction, loosen the four screws
on panel. Set panel aside.
4. Remove original air filters. See Figure 8, p. 6 .
Figure 8. Filter rack removal
5. Install the new air filter per parts list table.
N No otte ess::
• Pay attention to the difference between
upper and lower level. See
Figure 9, p. 7
• Pay attention to length direction of filter
and filter rack.
IIn nsstta alllla attiio on n