Trane MOD02422, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 36

28 BAS-SVX40B-EN
Appendix: Using the Tracer
™
TU Service Tool with
Wireless Networks
To monitor, troubleshoot, or make modifications to devices on a wireless network, the Tracer TU
service tool must connect to a device that is a member of that network. This appendix describes
that process and how to access wireless network management information and functions.
For instructions on using Tracer TU to make changes to a wireless network, see “Modifying the
Network,” p. 23 .
Requirements for Joining
The requirements for joining Tracer TU to a wireless network are:
• Tracer TU version 8.2 (minimum)
• The Tracer TU Communications Adapter (Wireless) connected to the service tool laptop.
Note: For instructions onTracerTU Communications Adapter Wired/Wireless installation and
best practices, see the current version of X39641157/
• A user ID and password, if the network includes a Tracer SC.
Note: All wireless features are available through all connection types as of Tracer TU 8.3.
Joining Tracer TU with a Wireless Network
To join Tracer TU to a wireless network:
1. Locate the Adapter within radio range of any WCI that is a network member.
2. Launch Tracer TU. The Startup Task Panel appears ( Figure 14 ).
Figure 14. Tracer TU Startup Task Panel