UX360 Smart Thermostat
18-HD98D1-1B-EN 3
2. Product Specifications
Specification
Description
Model
THUI2360A200U
Product
UX360 Smart Thermostat
Size
7.125” x 4.725” x 1” (WxHxD)
Configurations
Heat Pump, Heat/Cool, Dual Fuel, Heat Only, Cooling Only
Maximum Number of Stages
5 Stages Heat, 2 Stages Cooling
Storage Temperature
-40°F to +167°F, RH non-condensing
Operating Temperature
32°F to 104°F, RH non-condensing
Input Power*
24VAC from HVAC System (Range: 18-30 VAC)
Power Consumption
2W (typical) / 5W (max)
Wire Usage
18 AWG NEC approved control wiring
Communications
Controller Area Network (CAN bus) 4-wire connection
System Modes
Auto, Heating, Cooling, Off, Emergency Heat
Fan Modes
Auto, On, Circulate
Cooling Setpoint Temperature Range
60°F to 99°F, 1°F resolution
Heating Setpoint Temperature Range
55°F to 90°F, 1°F resolution
Outdoor Temperature Display Range
Ambient Temperature: -40°F to 141°F (including dead band),
-38°F to 132°F (excluding dead band)
External Ambient Temperature: up to 136°F
Indoor Humidity Display Range
0% to 100%, 1% resolution
Minimum Cycle Off Time Delay
Compressor: 5 minutes, Indoor Heat: 1 minute
* On every application, 24VAC loads should be reviewed to be sure the indoor unit control power transformer is adequately sized.
3. General Information
3.1 What’s in the Box?
• Literature
- Installer Guide
- User Guide
- Warranty Card
• UX360 Smart Thermostat
• Wall Plate
• Mounting Kit
3.2 Accessories
• Wired Indoor Sensor (ZZSENSAL0400AA)
• Wireless Indoor Sensor (ZSENS930AW00MA*)
* Wireless Indoor Sensor software version 1.70 or greater
is required.
