Trane EDAB 1106A, Техническое руководство

Страница: 45 / 72

45 PKG-SVX19B-E4
Checks to be made on delivery
WARNING! Dispose of the packaging in
appropriate collection points.
The Mercury units are packaged in wooden crates or
anchored to a pallet and covered in cardboard.
Check that the delivery is complete and inform the carrier of
any damage to the unit which may be attributed too careless
or inappropriate transportation. Check, in particular, any
eventual damage to the panel in which the user terminal is
mounted.
Lifting and moving the unit must be carried out by a
mechanical lifter.
The following must be container within the packaging:
• The Mercury unit;
• Mercury Use and Installation Manual;
• Mercury unit electrical diagrams;
• Mercury unit cooling circuit diagrams;
• Mercury unit installation diagrams;
• List of spare parts;
• CE declaration with a list of the European standards to
which the machine must conform;
• guarantee conditions
Unloading the unit
To unload the unit from the pallet, carry out the following
procedure:
• move the pallet as near as possible to where the unit is
to be installed;
• use a ramp to avoid any damage to the unit during
unloading;
• remove the blocking screws which fix the unit to the
pallet;
• carefully push the unit along the ramp until it reaches
the floor.
Characteristics of the installation area
WARNING! The unit must be installed internally
and protected from adverse conditions.
The unit is predisposed to be installed on raised access
flooring using mounting frames or appropriate floor stands
supplied on request from Trane. However, the upflow units
(upwards air flow) with air intake through the rear or front can
be installed also on floors which are not raised.
The area of installation must have the following
characteristics:
• make sure to leave a 700mm clearence (distance D) in
front of the unit once it has been fitted. Check that air
intake and discharge connections are not blocked in any
way, not even partially;
• a horizontal and even floor;