Trane CWCS, Руководство по эксплуатации

Страница: 22 / 27

22
Set time
Cooling:
1 hour
1
¢J
2
¢J
SLEEP ON
SLEEP time setting
SLEEP time setting
SLEEP ON
Heating:
2
¢J
1 ¢J
1 hour
Set time
SLEEP OPERATION
About the SLEEP FUNCTION
To prevent excessive cooling during sleep, the SLEEP function automatically modifies the thermostat setting in accordance with the
time setting. When the set time has elapsed, the air conditioner completely stops.
¡·
During Cooling / Drying operation:
When the SLEEP is set, the thermostat setting is automatically
raised 1
¢J
every sixty minutes. When the thermostat has been
raised a total of 2
¢J,
the thermostat setting at that time is
maintained until the set time has elapsed, at which time the air
conditioner automatically turns off.
¡·
During Heating operation:
When the SLEEP is set, the thermostat setting is automatically
decreased 1
¢J
every one hour.
The thermostat setting can decrease total 2
¢J
.
¡·
Operation Model:
1.While in the cooling model, whenever the SLEEP function is
started, the thermostat setting is automatically raised 1
¢J
.
Setting is raised 1
¢J
again after sixty minutes. The total raise
is 2
¢ J ¡ C
2.SLEEP function is not valid on FAN mode.
TO CLEAN AIR FILTER ELECTROSTATIC CLEANER(OPTIONAL)
To Clean Air Filter
2
The function is valid only in POWER ON status.
1
After press the "AIR CLEAN" button , the air clean function
is started.
Remote controller displays "CLEAN ".
Electrostatic Cleaner
execute air clean
function
cancel air clean
function
1
When indoor fan operates over accumulated 200 hours,
SLEEP LCD will flash, it is time to clean air filter. After
cleaning, please press UNMANUAL AUTO button, it will
calculate fan operation hours from start again.
2
SLEEP LCD will flash continuously if you don't press
UNMANUAL AUTO button.
3
When clean air filter, less cooling efficiency and power
expend will happened before put air filter back.