Trane CFEA 04 CEM1, Руководство пользователя, Страница: 7 / 16

UNT-SVU001-EN
7
Timer Operation
Once you select the timer operation,
the settings are saved in the remote
control. Thereafter, the air
conditioner will start operating under
the same conditions when you simply
push the POWER button of the remote
control.
Setting STOP Timer
You can set the STOP timer to stop
the unit automatically at any desired
time up to 24 hour ahead.
- Press POWER button to turn on
the unit and the display panel
show the previous condition.
- Press STOP button once. On the
display panel, the last set time of
the STOP timer will be blinking.
- Press HOUR or MIN buttons to
change the time (pass this step,
if no time change is required).
- Press SEND or STOP buttons
to transmit the signal to the air
conditioner. The set time will stop
blinking.
- The unit will stop automatically at
set time of OFF timer
- To cancel the STOP timer, press
STOP button again.
Setting START Timer
You can set the START timer to start
the unit automatically at any desired
time up to 24 hour ahead.
- Press POWER button to turn on
the unit, and the display panel
shows the previous condition.
- Press START button once. On
the display panel, the last
set time of the START timer will be
blinking.
- Press HOUR or MIN buttons to
change the time (pass this step,
if no time change is required).
- Press SEND or START buttons to
transmit the signal to the air
conditioner. The set time will stop
blinking.
- The unit is now standby for starting
automatically at set time of START
timer.
- To cancel the START timer,
press START button again.
Note:
In case of power failure,
the START/STOP timer will be
automatically cancelled as there is
no electricity in the air-conditioner.
(But the set time on the remote unit
is still displayed due to the batteries).
If any button or the remote unit is
pressed when the electricity is back to
normal, this feature will be re-activated.