Trane BAYLVKIT100A Скачать руководство пользователя

Страница: 4 / 4

INSTALLER'S GUIDE

Step 9

- Connect the wires to the low voltage terminal

strip per the air handler Installer's Guide.

Step 10

- Replace the cover on the low voltage conduit

kit enclosure.

Step 11

- Replace the coil compartment front panel.

Step 8

- Remove the two screws on the enclosure

cover and slide cover out. Set pieces aside.

Step 9

- Route the thermostat control wiring through

the conduit. Leave approximately 12" extra to be
able to slide the control bracket assembly out.

12"

About Trane and American Standard Heating and Air Conditioning

Trane and American Standard create comfortable, energy efficient indoor environments for residential applications.

For more information, please visit www.trane.com or www.americanstandardair.com

The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are

committed to using environmentally conscious print practices.

18-GJ27D1-1A-EN 03 Aug 2020
Supersedes 18-GJ27D1-1 (October 2010)

Содержание BAYLVKIT100A

Страница 1: ...rpretation of this information nor can it assume any liability in connection with its use SAFETY HAZARD Sharp Edge Hazard Be careful of sharp edges on equipment or any cuts made on sheet metal while i...

Страница 2: ...ssembly flanges must rest on the air handler and the assembly must be slid towards the front of the air handler so it is resting against the inside of the door notch Step 2 Mark the four mounting hole...

Страница 3: ...duit nut Step 5 Remove the coil compartment front panel Step 6 Match the conduit bracket up to the marks made in step 2 Step 7 Use the four provided screws to secure the conduit entry kit to the side...

Страница 4: ...ely 12 extra to be able to slide the control bracket assembly out 12 About Trane and American Standard Heating and Air Conditioning Trane and American Standard create comfortable energy efficient indo...