4
5
6
©2020 Trane
Trane has a policy of continuous product and product data improvement and reserves
the right to change design and specifications without notice. We are committed to using
environmentally conscious print practices.
Trane - by Trane Technologies (NYSE: TT), a global climate innovator - creates
comfortable, energy efficient indoor environments for commercial and residential
applications. For more information, please visit trane.com or tranetechnologies.com.
6
67
Dimensions
150,20 mm
[5.913 in]
125,00 mm
[4.921 in]
81,30 mm
[3.201in]
62,20 mm
[2.449 in]
Installing the USB Cellular Module
Note:
The USB Cellular Module fits through a 1 inch conduit opening.
1. Depending on your site installation, insert the USB Cellular Module
into a 1 inch knockout or conduit.
2. Mount with arrow on top of the module pointing towards the wall.
3. Tighten the nut prior to connecting the USB cable.
•
General applications: Tighten as needed to achieve 15 to 25%
compression of the gasket. Acceptable compressed gasket
thickness: 1.19 to 1.35 mm (0.047 to 0.053 inch)
•
Moisture-resistant applications: Use of a torque wrench is
required (X14088509001 wrench or similar). Required torque: 2.6
+/- 0.2 N-m (23.2 +/- 2.0 in-lbf). Remember to take into
consideration the extended lever arm length of the
X14088509001 wrench when determining the torque measured
by the torque wrench.
Note:
For all applications, do not exceed specific torque.
4. Connect the USB cable to the USB Cellular Module by lining up the
connector, then pressing together and twisting the locking bushing a
quarter turn to the right.
5. Connect the other end of the USB cable to a USB port on the
controller.
Figure 1.
USB Cellular Module kit components
BAS-SVN213A-EN 27 Oct 2020
(NEW)
Agency Listings and Compliance
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interferences that may cause undesired operation.
United States Compliance
UL Listed - UL 60730-1
Canadian Compliance
CUL Listed - CAN/CSA -E60730-1
