6200 Troup Highway
Tyler, TX 75707
www.trane.com
www.americanstandardair.com
Procedure:
1. Place valve cover on unit by sliding
the tab(s) on the top of the valve
cover underneath the controls cover
(see Figures 1 and 2). Then push
the bottom of the valve cover in so
that the valve cover sits flush with the
controls cover and access panel.
2. Attach the valve cover to the unit
using (2) of the 12-18 screws in the
kit.
NOTE:
For alternate electrical routing, punch
out the knockout on the valve cover (as
shown in Figure 2).
Figure 1
Figure 2
2 18-HE95D1-2
Tabs
Tab
Knock
Out
