ARTC-SVX001B-EN
9
Evaporator
The brazed plate evaporator is constructed as corrugated channel
plates with filler material between each plate. The filler material
forms a brazed joint at every contact point on the plates creating
complex channels. This allows fluid to come into close proximity of
the cold refrigerant, separated only by channel plates, thereby
efficiently cooling the fluid to the required temperature.
Models with the brazed plate heat exchanger are typically made of
SAE Grade 316 stainless steel and 99.9% copper brazing materials.
Interconnecting headers are carbon steel.
N
No
otte
e:: A optional configuration with shell and tube evaporators
having a carbon steel outer shell and copper tubing may be
found in some chillers.
Optional Tank and Pump Module
Your chiller may be equipped with an optional tank-
and-pump module. See