Features and Benefits
ZN510 & ZN524 Controls
WSHP-PRC003-EN
R
21
Tracer ZN510 & ZN524 Controls
The Tracer ZN510 and ZN524 are direct
digital control (DDC) systems specifical-
ly designed for single and dual circuited
water-source equipment to provide con-
trol of the entire unit, as well as outputs
for unit status and fault detection. Each
device is factory installed, commis-
sioned, and tested to ensure the high-
est level of quality in unit design.
Each of the controller’s features and
options were selected to coordinate
with the unit hardware to provide
greater energy efficiency and equip-
ment safety to prolong the equipment
life.
In addition to being factory configured
for control of the unit fan, compressor
and reversing valve, the ZN510 and
ZN524 controllers are designed to coor-
dinate the waterside of the water-source
system through the Tracer Loop
Controller (TLC). If applied in a peer-to-
peer communication environment, data
between similar controllers may be
exchanged without requiring a building
automation system.
By teaming the ZN510 and ZN524 with
the TLC, a low first-cost for the mechan-
ical equipment, water loop, and water
pump optimization is provided to the
owner.
For owners who require a full building
integrated "open protocol" system, The
ZN510/ZN524/TLC application is
upgradable to support complete build-
ing control through Tracer Summit.
Because the ZN510 and ZN524 is
LonTalk certified, it is capable of work-
ing with, and talking to other LonTalk
certified controllers providing the build-
ing owner more choices, and the design
engineers more flexibility to meet the
challenges of building automation.
See
Figure 26 for ZN510 control box.
Figure 26:
ZN510/ZN524 control box