BAS-SVX44C-EN
33
Functions
•
Touch blinking
to proceed to the next section,
Day/Time/Period Schedule Change Mode
, before
the 20-second time out. Time out changes to 60 seconds for the change modes.
Day/Period/Time Schedule Change Mode
This mode is used to select the day, day group, multiple day groups, period times, fan, and occupancy.
The default settings,
Number of Periods, Occupancy Settings,
and
Day Groups
, are configured using
Configuration Option Numbers 0231, 0232, and 0233 respectively
.
To change day/period/time:
4. First day or day group selected is carried over from the schedule display mode. To change/add multiple
days or day groups, touch the desired weekday icon (Mo, Tu, We, and so on). The day of day groups
are toggled
ON
or
OFF
with each touch.
Note:
The first single day or day group selected is the primary. Any additional day or day groups
selected are temporarily loaded with the primary values. Any changes will apply to all selected
day or day groups.
Note:
Day or Day Groups can only be selected in
Day/Period/Time Schedule Change Mode
.
5. Touch
to select the period of day.
6. To change the start time of the selected period, touch either
or
to increment or decrement
the time in 15-minute increments.
7. Touch
to change the occupancy setting to either occupied (
) or unoccupied (
), if desired.
8. If Fan is enabled, touch the Fan area to change to desired fan setting.
9. Repeat steps 1 through 5 to set the start times and occupancy for all days/periods.
10. Touch
to proceed to the next section,
Setpoint/Fan Schedule Mode
, before the 60-second time
out.
Note:
Touch
and
to toggle between
Day/Period/Time Schedule Change Mode
and
Setpoint/Fan Schedule Mode
.
Note:
Selecting
OK
will save changes and a
Cancel
will remove any changes since the last save and
then exit schedule change mode.
Top Arrow: Cool
Bottom Arrow: Heat
Tu
A
B
E
J
Содержание BAYSTAT152A
Страница 53: ...BAS SVX44C EN 53 Notes...
Страница 54: ...54 BAS SVX44C EN Notes...
Страница 55: ...BAS SVX44C EN 55 Notes...
