R. Stahl Tranberg AS
E
|
stahl-tranberg.com
Main office: Strandsvingen 6
|
N-4032 Stavanger
|
Norway
|
T
+47 51 57 89 00
|
F
+47 51 57 89 50
Office Oslo: Luhrtoppen 2
|
N-1470 Lørenskog
|
Norway
|
T
+47 24 08 44 10
IMPORTANT
Read this instruction carefully before installing the
product
COPYRIGHT
©2016-2018 Stahl Tranberg AS
The information contained in this document re-
mains the sole property of Stahl Tranberg AS. No
part of this document may be copied or reproduced
in any form or by any means, and the information
contained within it is not to be communicated to a
third party, without the prior written consent of Stahl
Tranberg AS. The document, or any part of it, may
not be translated to any other language without the
written approval from Stahl Tranberg AS.
DISCLAIMER
Stahl Tranberg AS endeavors to ensure that all infor-
mation in this document is correct and fairly stated,
but does not accept liability for any errors or omis-
sions.
The TEF 9980 status light may be installed in Zone 1,
2 or safe area. The Equipment shall not be installed
in Zone 0!
HANDLE WITH CARE! The TEF 9980 is an Ex d op
is signal light, with a glass dome. Whereas glass is
chosen for its lifelong transparency and chemical sta-
bility, it has its limitations when it comes to impact
strength.
High intensity light output.
Do not look directly into the light.
This may cause discomfort or serious
permanent damage to your eyes.
Note that changes made to the product and/or instal-
lation of components which do not conform to the
manufacturer’s specification, may be a safety viola-
tion. The manufacturer will in no circumstance be
held responsible for such activity.
For your health and safety, always use safety gear
suited for the task. Be certain to follow codes, regula-
tions and/or specific procedures that are related to
the installation.
SAFETY INSTRUCTIONS
LIGHTING
TEF 9980 STATUS LIGHT,
MAIN LIGHT & REPEATER LIGHT
ZONE 1, ZONE 2 & SAFE AREA
USER MANUAL
Subject to change without prior notice
TUM5721 REV. C 23.01.2020