TEF 2460 LED
LUMINAIRE USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
TOOLS REQUIRED
Regular tools required for installation.
•
Tools for mounting, e.g. 10 mm wrench – to fasten the
mounting bracket to the deck.
•
4 mm hexagon key (Unbraco/Allen key) for mounting
the top to the termination compartment, and for the ex-
ternal bonding connection. A long key, >80mm is rec-
ommended for easy installation.
•
3 mm hexagon key (Unbraco/Allen key) to loosen the
screws for the terminal assembly, if necessary.
•
32mm wrench to disassemble the blind plug and as-
semble the cable gland.
•
Wrench for tightening the pressure nut on the cable
gland(s).
Do not use powertools when fastening globe!
SAFETY PRECAUTIONS
Note that changes to the product and /or installation of
components which do not conform to the approval, may
be a safety violation. The manufacturer will inn no cir-
cumstance be held responsible for such activity. For your
health and safety, always use safety gear suited for the
task. Be certain to follow codes, regulations and /or spe-
cific procedures that are related to the installation.
MAINTENANCE INSTRUCTIONS
The luminaire should be inspected according to Company
routines. The manufacturer suggests regular check for wa-
ter intrusion in the termination compartment. Due to the sili-
cone potting compound used in this product, some silicone
oil may condense on the inside of the glass. All electronics
are sealed, so this will have no technical concern.
When cleaning, use only mild detergents. Alcohol or petro-
leum based products may damage the gaskets.
APPLICATIONS
•
Perimeter lights on helideck.
Green or red/green light (24V DC only).
• Zone 1, zone 2 and safe area
APPROVALS
IECEx / ATEX CERTIFIED
Ex e mb op is IIC T5 Gb
According to:
EN 60079-0:2012
EN 60079-7:2007
EN 60079-18:2009
EN 60079-28:2007
IEC 60079-0:2011
IEC 60079-7:2006
IEC 60079-18:2009
IEC 60079-28:2006
CE 0470
