Installation and operating manual - TUM5134
TEF 1058 Heat Trace Thermostat
Mounting and installation
DANGER
Incorrect mounting and installation may lead to explosion risks, risk of falling objects, risk for electric shock and
risk for equipment malfunction. In turn, this can lead to severe damage and/or injuries.
Mounting of wall mounted type (fig. 01)
•
Mount the thermostat junction box by at least two Pcs. M6 bolts placed diagonally on a wall or proper
supported rack.
•
Remove dust protection or stopping plugs and install selected gland. Use stopping plugs for unused
entries. Only certified cable glands and stopping plugs may be used. Select gland according to the cable
diameter used.
•
Strap the transition unit to pipe with pipe straps.
•
Assembly the flexible conduit according to the special gland. see fig. 02
