Installation and operating manual
TEF 2457 Luminaire, watertight
Electrical connections
Cable entries: 1xM20 cable gland, cable diameter 8-13mm and 1xM20 stopping plug.
Maintenance and cleaning
Inspection of the luminaire according to Company routines. The manufacturer suggests regular check for water
intrusion/condensation. If any water is inside the lamp, remove it immediately. Clean only with a damp cloth,
water and mild detergents. Avoid chemicals with high or low pH, abrasives, high pressure washer, strong
detergents, solvents, petroleum- or alcohol based cleaning agents and similar. Avoid any corrosive media.
Disposal
CAUTION
This equipment or part of this equipment is considered EE-Waste, and shall be handled accordingly
•
Observe national and local regulations and statutory regulations regarding disposal
•
Separate materials when sending it for recycling
•
Ensure environmentally friendly disposal of all components
•
No component or packaging shall end up in the ocean during any stage of the product’s lifetime