More manuals & tutorials on our YouTube Channel.
Search for
TRAMPA Boards Ltd
on YouTube.
NEXT GENERATION
S K A T E B O A R D
C O N T R O L L E R
Safety
Warnings:
VESC
Manuals:
1
Follow the steps in the image below
NOTE THIS CANNOT BE DONE WITH THE VESC APP
2
Select SWD PROG and click CONNECT
3
Select BLE TRAMPA from the included firmwares and click UPLOAD
4
Once the upload is complete click DISCONNECT
5
Disconnect the VESC and remove the SWD program cable.
Now your Connect NRF Dongle is ready to pair with the WAND
Flashing Guide
If you own an existing TRAMPA VESC-Connect NRF Dongle, you may need to update the Firmware on
the Dongle before connecting the WAND. Your WAND comes with a program cable that plugs into the
SWD port & connects it a VESC, allowing FW updates.
1
Power on the VESC and connect to it through the APP or DESKTOP TOOL
2
Select INPUT configuartion wizard
3
Select the VESC the NRF dongle is connected to (usually ‘This VESC’)
then click NEXT
4
Select NRF controller and click next
5
You will see a pop-up box explaining that once you hit OK the VESC will ‘listen’
for the WAND for 10 seconds.
PLEASE ENSURE THE WAND IS OFF BEFORE PRESSING OK
6
While the VESC is ‘listening’ press any button on the WAND to power it on.
You will see a pop-up confirming that the WAND is paired
7
Finish the setup wizard, disconnect and you’re ready to ride!
Pairing Guide
Indepth Instructions found here:
WAND pairing instructions:
https://vesc-project.com/node/940
Flashing Guidance:
https://vesc-project.com/node/1113
Firmware update instructions:
https://vesc-project.com/node/1114
This Wand remote comes with a basic Firmware & the functionality described on
the front page. The VESC WAND Firmware will get updates over time. VESC-Tool
will inform you about available updates. Always use the latest version of
VESC-Tool & check for updates.
We strive to keep your product updated &
functional as long as we possibly can.
Please use the VESC-Tool Profiles to modify the power of your board. Limit the
top speed & power levels while trying out & testing the WAND. Get used to the
handling & check for stable connectivity before riding with higher powers.
Stay
safe!
SAFETY WARNING! Before riding your Board, please always check perfect
functionality. Never ride with a damaged remote or board! Always wear
appropriate full body safety gear when riding TRAMPA boards. Please carefully
read our general safety warning.
Please Email [email protected] for replacements
under warranty
Содержание VESC WAND
Страница 3: ......
