i)
Take out the bracelet body and the Material Velcro
Strap from the box and assemble the strap as below:
ii) To turn the device on, press the Red button until the LED
lights either a fixed
Green
colour if the bracelet battery is
charged or flash
Yellow
if it needs charging.
iii) Its recommended to charge the bracelet for 2 hours before
use. Take out the USB Cable and plug into the Bracelet to
charge it in a USB port. The LED light will flash
Green
during charging and be fixed
Green
when fully charged.
iv) Once fully charged the
C9T Bracelet
is ready to use.
To use the C9T Bracelet
2
(1)
(2)
(3)
(4)
