INSTRUCTIONS OF SAFETY
This chapter contains information on how to operate “FM2100” safely. BY following these
requirements and recommendations you will avoid dangerous situations. You must read these
instructions carefully and follow the strictly before operating the device!
The device uses a 10V...30V DC power supply. The nominal voltage is 24V DC. The allowed
range of voltage is 10V...30V DC, power – not more than 12 W.
To avoid mechanical damage, it is advised to transport the FM2100 device in an impact-proof
package. Before usage, the device should be placed so that its LED indicators are visible, which show
what status of operation the device is in.
When connecting the connection (2x3) cables to the vehicle, the appropriate jumpers of the
power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the (2x3) connection must be disconnected.
The device is designed to mount in a zone of limited access, which is
inaccessible for the
operator.
All related devices must meet the requirements of standard EN 60950-1.
The device FM2100 is not designed as a navigational device for boats and aircraft.
FM2100 has not USB interface; it has Mini USB connector type with physical RS232
interface. Do not plug it to PC’s USB port. Please use cables provided with FM2100
device. TRAKGPS is not responsible for any harm caused by using wrong cables for
PC <-> FM2100 connection.
3
