DRILL & PRESSURIZED COOLANT SYSTEM
1. Install correct shoes for rail type being drilled.
2. Install correct size Bonding Bit and Adapter into the
Drill arbor. See Bonding Bit Installation procedure on previous page.
3. Fill coolant bottle with TRAK-STAR cutting fluid ( a water
soluble and biodegradable product) Conventional fill
access is achieved by removing pump handle.
Caution: Contents under pressure. Partially open
to slowly release pressure before removing.
4. Attach coolant bottle quick connect hose fitting to drill,
located near power button inbetween clamp arms.
5. Pressurize coolant bottle until resistance is felt in the handle.
6. Open coolant shut off valve 1/4” and watch for
coolant flow from the nozzle onto the work surface.
NOTE - Coolant is under pressure -- stay out of path of spray.
If coolant does not flow, rotate valve further to open or unclog
coolant system.
01569 On/Off Valve
05621 Quick Connect Fitting
01592 Coolant Bottle and Hose Assy
Coolant System Replacement Parts
ROTAMAGIC™ CONCENTRATE CUTTING FLUID
A good flow of cutting fluid to the tool is important. It cools
and lubricates the cutting edge, helps evacuate the chips,
keeps the slug from expanding, and helps eject the slug.
Various mineral and sulphur base oils are quite popular,
however, water base solutions have better cooling qualities.
Listed is our own recommended Concentrated Cutting Fluid
for Twister Bits and similar cutting tools. It is a water soluble,
biodegradable product. This cutting fluid contains no
ingredients that are on the U.S. Government Hazardous
Materials List. It is a super concentrated form that will
require a 10:1 mixture of water.
6
7
Do not use straIGHt Water or WInDoW
WasHer FluID. DamaGe to DrIll WIll oCCur!
onlY use traK-star rotamaGIC Coolant.
Part No.
Description
11742-4
(4) 1 Gallon concentrate
bottles, makes 11 Gallons
each, or 44 Gallons total.
11743
(1) 5 Gallon concentrate
pail, makes 55 Gallons.
