TrailMax T-10-UR, Инструкция по эксплуатации

Страница: 19 / 75

®
page A-7
Addendum
Addendum
contact a local tire dealer. Note: You may not find this information on all tires because it
is not required by law.
M+S
The “M+S” or “M/S” indicates that the tire has some mud and snow capability. Most
radial tires have these markings; hence, they have some mud and snow capability.
Speed Rating
The speed rating denotes the speed at which a tire is designed to be driven for ex-
tended periods of time. The ratings range from 99 miles per hour (mph) to 186 mph.
These ratings are listed below. Note: You may not find this information on all tires be-
cause it is not required by law.
Letter Rating Speed Rating
Q 99 mph
R 106 mph
S 112 mph
T 118 mph
U 124 mph
H 130 mph
V 149 mph
W 168* mph
Y 186* mph
* For tires with a maximum speed capability over 149 mph, tire manufacturers some-
times use the letters ZR. For those with a maximum speed capability over 186 mph, tire
manufacturers always use the letters ZR.
U.S. DOT Tire Identification Number
This begins with the letters “DOT” and indicates that the tire meets all federal standards.
The next two numbers or letters are the plant code where it was manufactured, and the
last four numbers represent the week and year the tire was built. For example, the num-
bers 3197 means the 31st week of 1997. The other numbers are marketing codes used
at the manufacturer’s discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire manu-
facturers also must indicate the materials in the tire, which include steel, nylon, polyester,
and others.