www.TrailFX.com
Page
4
of
6
Rev 020218
2.
Attach the license plate to the Replacement Bumper
(Fig 8)
. Fasten the license plate with the hardware.
3.
Remove the Towing Hook from the frame, fasten the bumper to the frame with the hardware
(Fig 9A)
.Do not reinstall the
Towing Hook at this time
(Fig 9B)
.
Fig 8
(1)5mm Lock Washers
(1)5×15×1.2mm Flat Washer
(1)5mm Hex Nut
(1)5×15×1.2mm Flat Washer
(1) 5×20 Phillips Screw
Fig 9A
(2)12×130mm Hex Bolts
(4)12×24×2.5mm Flat Washers
(2)12mm Lock Washers
(2)12mm Hex Nuts
Fig 9B
Do not install at this time
