www.TrailFX.com
Page
3
of
5
Rev 031518
Bumper Installation
1.
Remove the fog light from the vehicle. Use the OEM screws and nut plates to fasten the fog light to the bumper
(Fig 5A &
5B)
.
2.
Attach the license plate to the Replacement Bumper
(Fig 6)
. Fasten the license plate with the hardware.
3.
Install the Towing Hook and the Bumper to the frame. Fasten the Towing Hook and the Bumper with the hardware
(Fig 7A
& 7B)
.
Fig
6
(1)5mm Lock Washers
(1)5×15×1.2mm Flat Washer
(1)5mm Hex Nut
(1)5×15×1.2mm Flat Washer
(1) 5×20 Phillips Screw
Fig
5A
Fig
5B
