www.TrailFX.com
Page
1
of
6
Rev 031318
PARTS LIST:
Qty
Part Description
Qty
Part Description
1
Driver/Left Sidebar
12
8mm-1.25 x 30 Hex Bolts
1
Passenger/Right Sidebar
16
8mm x 24mm x 2mm Flat Washers
1
Driver/Left Front Mounting Bracket
8
8mm Lock Washers
1
Passenger/Right Front Mounting Bracket
4
8mm Hex Nuts
1
Driver/Left Rear Mounting Bracket
4
8mm Nylon Lock Nuts
1
Passenger/Right Rear Mounting Bracket
8
8mm-1.25 x 25mm Combination Hex Bolts
2
Support Brackets (DS Front & PS Rear)
8
6mm x 25mm Hex Bolts
2
Support Brackets (PS Front & DS Rear)
16
6mm x 22mm x 2mm Flat Washers
4
8mm Nut/Bolt Plates
8
6mm Nylon Lock Nuts
4
8mm Plastic Retainers
5" Oval Nerf bar
Part No. A7054S/B
Fits:
2009 - Current
Dodge Ram 1500 Regular Cab
2010 - Current
Dodge Ram 2500/3500/4500/5500 Regular Cab
Passenger/Right
Rear Mounting
Bracket
(4) 8mm Bolt x 8mm Nut Plates
Passenger/Right Front
(driver rear) Support Bracket
Driver/Left Rear
Mounting Bracket
Front
(4) Plastic
Retainers
Driver/Left Front (passenger
rear) Support Bracket
Driver/Left Front
Mounting Bracket
Passenger/Right
Rear (driver
front) Support
Bracket
Driver/Left Rear
(passenger front)
Support Bracket
Passenger/Right
Front Bracket
Driver/left Side Step illustrated.
Note front step pad is slightly
closer to front end of tube
ASSISTANCE IS RECOMMENDED.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT OVER
TORQUE
.
STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM
45
TO
65
FOOT POUND.
60-180 min
1 866 638 4870
POLISHED STAINLESS STEEL
– LIMITED LIFETIME
POWDER COATED BLACK
– 3 YEARS
Cutting Not
Required
Drilling
Required
