Specifications
iMC GmbH
Phone : +49 (0) 4154 7093202-0
Email : [email protected]
http://www.imc-multimedia.com/
Specifications
ITEM
Specifications
Operating Voltage
12V DC
Consumption Current
Max. 90mA
ITEM
Specifications
Operating Voltage
12V DC
Operating Current
Max. 150mA
Camera
Wi-Fi Transmitter
Video Output
0.9~1.3Vp-p, 75
Ω
Night Vision Range
> 3 m
Image Sensor
1/3inch CMOS
Effective Pixels
628x586pixels(PAL)
510x496pixels(NTSC)
Video Format
PAL/NTSC
Operation Frequency
2400~2483.5MHz
Wireless Protocol
IEEE 802.11b, 802.11g,
802.11n(1T1R Modes)
Encryption Mode
WPA2
Modulation Mode
802.11b:DSSS(CCK,
DQPSK,DBPSK)
Video Format
PAL/NTSC
Electronic Exposure
Time
1/50s~12.5ns(PAL) sec
1/60s~12ns(NTSC) sec
Minimum illumination
< 0.5 Lux
Horizontal View Angle
80
°
Operation Temperature
-10
°
C ~ +50
°
C
Modulation Mode
802.11g/n:OFDM(BPSK
,QPSK,16QAM,64QAM)
Transmission Distance
With No Obstacle
> 20 m
Operation Temperature
-10
°
C ~ +50
°
C
Storage Temperature
-20
°
C ~ +60
°
C
O
ti
H
idit
20% 90% RH
Storage Temperature
-20
°
C ~ +60
°
C
Operation Humidity
15% ~ 85% RH
Dimensions
36 x 47 x 33 mm
Weight
60g
Operation Humidity
20% ~ 90% RH
Dimensions
48 x 86 x 24 mm
Weight
70g
*
S
pecifications are subject to change without prior notice.
2
Trailer Vision Ltd
01733 246473
support
@
trailervision.co.uk
www.
trailervision.co.uk
Specifications
Installation
The camera can be roof or wall mounted, utilising the supplied velcro fixings. Locate the
camera in a suitable location, ideally behind the horse(s) and near to the light/light switch
(power source). Connect the supp
l
ied cables to the light/light switch (power side) and fix
the power socket
*
to roof/wall (the
flush mounted
socket can be screwed to a piece of
plastic etc, rather than to the trailer/horsebox wall, if prefer
r
ed). Connect the camera plug
into the socket.
*Two power sockets are supplied, a flush mounted and 'hole' mounted; the hole mounted
socket requires a 14mm hole. If the flush mounted socket is utilised, the red cable should
be connected to the central/RH terminal and the black cable to the LH terminal.
Please Note:
- the camera will only operate when the light/power source is 'live' (for a trailer installation this
may require the tow vehicle to be connected and the side-lights switched on)
- please remove the camera when not in use
-
12V ONLY (Battery Pack available for 24V Lorries etc)
