Choose a
suitable
place on the winds
creen
and mount the suction cup
;
w
ith the suction lever in the released position, press the suction cup
against the winds
creen
. Press the suction
l
ever toward the suction cup to lock the
mount. To adjust the angle of
the
monitor, loosen
the collar
on the ball joint
&
retighten in the
desired position.
3. Connect the monitor
to vehicle power via the cigarette lighter
power adapter.
5
6
Rotating the image and switching between 'normal' and mirror image
view:
When the monitor is displaying the camera image short press [MENU/OK]
to enter the main menu interface, select the "Image Mirror" icon and long
press [MENU/OK], to set 'upwards' or 'downwards' image. After setting,
short press twice to exit the setting.
Select the "Image Mirror" icon and long press the middle button [MENU/OK]
to enter the mirror setting interface, short press [ADD] or [DEC] button to
set mirror or normal image. After setting short press [MENU/OK] twice to
save and exit.
NB.
Please use mirror image (default view) for reversing and rear view
applications.
04.
3) If utilising the
air-vent mount
, please remove the
dashboard mount and complete the following instructions:
Use the L-shaped screwdriver
to tighten the vent screw
Make sure that the cross of the
base lines up with the cross on
the rear of the monitor
Insert the ball into the nut
Rotate the nut and tighten
clockwise
Press the vent mount ball
firmly into the threaded base
Move the lever up/down to
clamp to the vent
BUTTONS & SETTINGS
Function of the rear buttons:
