Trailer Vision CN-900, Инструкция по эксплуатации, Страница: 8 / 13

14 15
Please touch the icon [CALIBRATION] to enter the touch coordinate setting. Please touch the cross
mark(+) exactly on the center of screen. When the cross mark is touched, it goes to the next step. If
all setting is finished, the system is going to restart automatically.
If touch screen is not working well, please set up the “Calibration”.
2. CALIBRATION
1. BRIGHTNESS
- Please set up the brightness with touching the [<], [>] buttons.
2. CONTRAST
- Please set up the contrast with touching the [<], [>] buttons.
3. COLOR
- Please set up the depth of color with touching the [<], [>] buttons.
4. TINT
- Please set up the tint with touching the [<], [>] buttons.
5. MIRROR VIEW
- It reverses the camera image to the direction users want. Once it is pressed the button of right/
left, it shows up the reversed screen.
6. CAMERA MIC.
- It sets up the function of on/off at the connected camera’s internal microphone.
7. DISPLAY REAR VIEW
- AUTOMATIC : Once the trigger signal is detected, the rear view screen is going to show up auto -
matically.
-
MANUAL
: Regardless of trigger signal, it shows up the rear view screen when it is only the rear
screen mode.
8. PARKING GUIDE LINE
- It shows up the parking guide line on the screen. (None - 1st Line - 2nd Line - 3rd Line)
9. SAVE & CLOSE
- Save the setting value and close the screen.
3. REAR CAMERA SETUP