InstalL Instructions (Cont'd.)
step 5
Depending on model the weld nuts shown may need
to be removed. The tack welds are easily broken by
striking the nut with a punch. If your vehicle does not
have these weld nuts please skip to step 7.
It may be necessary to file the tack welds smooth.
step 6
step 9
Use the supplied M12 hardware to secure the center
mount.
step 10
Install short M8 hardware into step plate.
step 7
Unbolt and remove center trim.
step 8
Slide bumper into frame. Use the supplied ½”
hardware to secure the side mount plates.
