Trafomatic Audio TARA 30A, Руководство пользователя

Страница: 7 / 16

PACKAGING
Save the original packaging in a dry place. The packaging has been designed to protect your
device from stresses incurred during shipping. Using packaging different from the original in -
creases risks of shipping damages.
PREPARATION FOR USE
Place your preamplifier on a flat, stable surface.
Power switch, located on the left side of the power supply unit should be in the OFF (0) position.
Make sure that the voltage selector switch (located on the rear panel, above the AC inlet)
is properly set: this switch needs to be set so that the number displayed (115 or 230) corre -
sponds with the line voltage in your country.
Connect the power supply unit with the preamplifier unit by using provided power cables.
TARA 30A has dual power supply and both cables must be connected.
Plug in the power cord.
Connect LINE OUTPUTS of the TARA 30A to line inputs of your amplifier.
Connect your audio source(s) to the preamplifier’s input(s) (rca1 and xlr1 through xlr3).
If some of your sources require signal grounding (turntable tonearm, for example), connect
the wire to the grounding lug (GND) on the rear panel of the power supply unit.
By using the front panel input selector switch, select the appropriate audio source.
Make sure that volume control is set to minimum position.
Turn on the TARA 30A by using power switch located on the left side of the power supply unit.
Turn on your power amplifier.
Slowly increase volume, to make sure there are no unusual noises coming out of the speakers.
CONGRATULATIONS! You are all set and ready to enjoy high sound quality of the TARA 30
Line Level preamplifier.
06
TARA 3 0A - Line Level Preamplifier - User Manual