TraffiCalm Wrong Way Alert M75-DETCA-0000, Руководство по эксплуатации

Страница: 15 / 24

15
Setup Wizard
You will set up the Alert zone first as this contains the Controller.
The radar can be set to either approaching or receding, set in
whatever direction a wrong way driver would be detected by the
radar. The default radar sensitivity settings typically suffice. The
radar angle and zone size will need to be adjusted according to
the system’s phys properties.
The zone size can be
measured by walking at
the radar and observing
the diagnostic lights on
its face. When the light
turns red, detection
has begun (mark
this location on the
road). When the light
extinguishes, detection
has concluded (again,
mark this location). Measure and enter the distance between the
two marks.
If present, you can add a Collaborator’s ID (ie. 0E23DB) in the
Alert Zone and set it up like the Controller.
The final selection on the Alert Zone page will be what other
zones will be utilized and how they will collaborate. Select
the radio button next to each desired zone and select the
collaboration option from the drop down menu.
⟨Configuration⟩
marker on roadway