Installing Lead Acid Batteries in SafePace Evolution Signs
W
ARNING
:
Proper battery care and maintenance is required. Improper care and maintenance of
batteries may void the product warranty. We strongly recommend that you do the following:
• Replace the batteries every TWO years, in order to prevent damage to the sign.
• Remove the batteries whenever you need to transport the sign, in order to prevent internal damage to the
sign.
To install the battery in the battery bracket:
1.
Make sure that the battery has been removed from its packaging, then open the sign enclosure.
2.
Carefully slide the battery into the bracket and make sure that it is properly seated as shown in the
following image.
3.
When the battery is secured in the battery bracket, slide the battery connectors onto the battery
terminals as follows:
•
Slide the black connector onto the BLACK (
-
) negative terminal.
•
Slide the red connector onto the RED (
+
) positive terminal.
4.
When you are finished, you can close and latch the sign enclosure.
W
ARNING
:
It is vitally important, whenever you close the sign, that you close and lock
all
of the latches
properly to avoid water infiltration as this could damage the sign and void your warranty.
SafePace® Evolution 15SD Installation Manual
p. 19
