Installing Lead Acid Batteries in SafePace Evolution Signs
To install the battery in the battery bracket:
1.
Make sure that the battery has been removed from its packaging, then open the sign enclosure.
2.
Place the battery into the lower bracket then push the battery flat against the enclosure. You should
hear it snap into place.
3.
When the battery is secured in place, connect the battery and sign power connectors to power on the
sign.
Installing Lead Acid Batteries in SafePace Evolution Signs
The battery should be placed with care into the battery bracket inside the sign. There are two parts to the
battery bracket: the upper bracket and the lower bracket. However, the sign is shipped with only the lower
bracket installed. You need to install the upper bracket after you place the battery in the sign.
Figure 23: Lead acid battery inserted and connected
N
OTE
:
This image is for illustrative purposes only and the number of batteries in your sign may be
different from that shown.
To install the battery in the battery bracket:
1.
Make sure that the battery has been removed from its packaging, then open the sign enclosure.
SafePace® Evolution11 Installation Guide
p. 24
