Page 8
Copyright ©2015 Traffic Logix® Corp. SafePace® 650: Installation Manual V. 1.5
Installation of Pole Bracket on Telespar Pole
Use the supplied 2.5-inch stainless steel security bolts and nuts to secure the Pole Bracket to the 2-inch
Telespar pole.
*A 2-inch Telespar pole should be used
It is very important that the head of the bolt be placed on the Telespar pole (See Figures 12
and 13) and that the nuts be placed on the inside part of the bracket (see Figures 14 and 15).
Figure 12
Figure 13
Figure 14
Figure 15
Installation of the Pole Bracket using supplied banding straps
It is highly recommended that if banding is used to secure the Pole Bracket additional screws and/or
bolts should also be used (see Figure 17 below) to further prevent theft and vandalism.
Figure 19
Figure 17, Additional lag bolts
should be used for added security
Figure 16,Pole bracket
banded to utility pole
Figure 18, Profile view
of pole bracket
banded
Banding strap
holes (4)
Teleapar pole
mounting holes (6)
U-Channel
mounting holes (4)
POLE BRACKET
