Traeger TFT17LLA, Руководство пользователя

Страница: 7 / 17

5) Squirt 2 tablespoons of Alcohol Gel fire lighter into the Firepot on top of the Pellets.
DANGER! Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid
or similar liquids to start or “freshen up” a fire in this Grill. Keep all such liquids well away
from the Grill when in use.
6) Carefully light the Alcohol Gel with a fireplace match or a long-reach butane lighter.
DANGER! Never squirt Alcohol Gel into a burning fire or a hot Firepot. The Alcohol Gel
bottle could explode and cause a fire, serious injury or death.
7) Let the Alcohol Gel and Pellets burn for approximately 4 minutes.
8) After assuring the Pellets have ignited, install the Grease Drain Pan Assembly and
Porcelain Grill back in place.
CAUTION! You will now have a fire in the Firepot. Be careful not to burn yourself when
you install these components. Gloves are recommended.
9) Turn the Switch ON (--) and the Dial Knob to the Smoke, Medium, or High setting desired.
With the Door closed, let the Grill pre-heat for approximately 10 minutes before placing food
in the Grill.
Control Shutdown cycle
The control for the TFT17LLA comes with an automatic shut down cycle. When finished
cooking on your TFT17LLA set the Dial Knob to the Shut Down Cycle position, this will leave
the Draft Induction Fan running for ten minutes to burn any excess pellets in the fire pot. After
the fan runs for ten minutes the controller will power off and the fan and it will stop running.
CAUTION! The main power switch will shut the power off to the controller and the Dial Knob
switch will cut off power to the grill components only. When servicing the controller or any parts
ensure that the power supply is disconnected to avoid a shock hazard.
Control Safety Features
The controller comes equipped with 2 safety features that will help you to keep the grill
operating correctly. The first of these is a low temperature alarm. If the grill stays below 125
degrees as read by the RTD temperature sensing device for a period of 10 minutes the control
will go into an alarm state and the display will read “LEr”. This will shut off all power to the
internal components of the grill. The display will stay in this state until you turn off the main
power switch.
The second safety feature will be a high temperature alarm. If the grill obtains an
internal temperature reading of 550 degrees as read by the RTD temperature sensing device
the control will go into alarm state and the display will read “HEr”. This will turn off all power to
the internal components of the grill. The display will stay in this state until you turn off the main
power switch.
Whenever either of these alarm conditions occurs you should check to see what caused
this condition and fix the problem. Call customer service if you need help.