20
Probe 1
Probe 2
WARNING!
Remove all unburned
pellets and ash from inside and
around the firepot. (See instructions
for proper handling and disposal of
ash on page 19.)
Plug power cord into an appropriate
grounded electrical outlet and restart
the grill. Pellets should fall into the
firepot and the hot rod should begin
to heat (it will start to turn red).
CAUTION! Do not touch the hot rod.
3
4
Probe
Selector
Probe 1
Probe 2
375
Smoke
Shut Down
Cycle
High
Power
OFF
ON
DANGER!
If the grill failed to light or
the fire went out, turn the switch OFF
(
O
) and disconnect the power cord.
If the grill is still hot, allow it to cool
thoroughly.
Open the door and remove all food,
the porcelain-coated grill grates, the
grease drip tray, and the heat baffle.
WARNING!
If at any time the grill fails to light or the fire in the firepot goes out while cooking or smoking
and there are sufficient pellets in the pellet hopper, it is important to follow these steps. Failure to do so may
cause a hazardous “overfiring” of your grill due to an excess of unburned pellets in the firepot.
1
2
REIGNITING YOUR GRILL
T02637_Pro_QVC_OM.indd 20
12/13/19 5:06 PM
