background image

Before You Begin

● Check local building codes regarding shed location and any other local requirements.

● Check the packing list on page iv to make sure you have all of the necessary parts.

● Separate everything in the cartons by the part number while reviewing the parts list.

● Be sure the day you select to build your shed is dry and calm.

● Whenever possible, two or more people should work together to assemble the shed.

    We suggest that one person positions parts while the other handles the fasteners and tools.

Before assembly, decide on a location for your building. We recommend a level area with

good drainage. Allow enough space around the building so there’s plenty of room to screw

the panels and then move the different parts into position. Remember to leave plenty of

room for the door to fully open.

● An electric drill/driver

● A Phillips screwdriver

● Gardening or work gloves

● Sealant or caulking gum (optional )

● Step ladder

● Tape measure

Safety First

Safety precautions are important to follow throughout the construction of your building.

  

● Take care when handling the various pieces of your building since some contain sharp

    edges. Please wear work gloves, eye protection and long sleeves when assembling or

    performing any maintenance.

    

● Keep children and pets away from your worksite to avoid distractions and any accidents.

  

● Never concentrate all your weight on the roof of the structure. When using a step ladder

    make sure it’s fully open and on a level surface.

● To avoid any damage, do not attempt to assemble the building on a windy day. The larger

    panels can act as sails making construction difficult and unsafe.

You Will Need...

i

Selecting & Preparing Your Site 

Содержание GS508-V1






















Отзывы: