10
Installation
• When interconnected, all Smoke Alarms will sound upon activation.
• Warning: This alarm cannot be operated from power derived from a square wave,
or wind derived power sources. These power sources produce high peak voltages that
will damage the alarm.
• Trader recommend that the smoke alarms are installed on their own subcircuit to avoid
false alarms and nuisance chirping that may be caused by electromagnetic
interferences from other electrical equipment.
Mounting Instructions
• The models contain a battery pull tab for your convenience. Tab must be removed to
activate battery backup and provide power to the unit in the event of mains power loss.
• Pull out the battery pull tab.
• If you want to replace the battery, please press the battery reminder tab down into the
battery compartment while inserting the battery. Caution: If the battery reminder tab is
not held down in the battery compartment by the battery, the unit will not attach to the
mounting plate.
• Align and slide smoke alarm up onto mounting base then slide in the reverse direction
of arrow to ensure proper connection.
