Product Code: TQBJ12TA
Made in China to TQB Brands Pty Ltd Specifications
Page 9
Visit us at www.tqbbrands.com.au
WARRANTY
TradeQuip products have been carefully tested and inspected before shipment and are guaranteed to be free from defective
materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the
guarantee period is ninety days from the date of purchase.
Should the machine develop any fault, please return the complete tool to your nearest authorised warranty repair agent or contact
TQB Brands Pty Ltd Warranty team –
.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free
of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the authorised TQB Brands Pty
Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your
proof of purchase within the 12 month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
All images and illustrations shown are for reference purposes only. All information, specifications and illustrations in this manual
are based on the latest information available at the time of publication and are subject to change without notice. The information
in this manual is periodically revised to ensure the latest information is included. Download the latest version of this manual and
other related technical documentation from
.
Poor lift
performance
Pump has no
resistance, lift ram
will not raise to full
stroke
Fluid level low
Air trapped in system
Fill fluid to correct level
Lift ram raised for
extended period causing
air ingress to hydraulic
system
Fill fluid to correct
fluid level and bleed
system
With ram fully
retracted, remove oil
filler plug to let
pressurised air
escape
reinstall oil filler plug
then bleed system
Will not lift
to full
extension
Lift ram has limited
stroke, pump loses
resistance
Fluid level low
Lift ram raised for
extended period causing
air ingress to hydraulic
system
Fill fluid to correct
level then bleed
system
