Product Code: 6053/4
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
Assemble the Trolley:
1.
Take the four uprights and insert the four castors into the bottom of each. (See fig.1)
Ensure the castors are fully seated.
2.
Assemble the front and back frames.
3.
Take two of the uprights with locking castors and insert long beam between the two
uprights at the top and bottom. (See fig.2) Ensure the beams are the correct way up
(See fig.2A/B) and seated correctly, use a soft faced mallet to tap the beams home.
4.
Repeat process for the other two uprights using the non-locking castors.
5.
Attach the front and rear frame together using the smaller side braces with the
double tabs, insert at the top and bottom of the frames (See fig.3A). Ensure again
they are the correct way up and that the locking castors are at the front.
6.
Between the two uprights, install the centre braces (single tab) half way up the
frames. see fig.3B.
7.
6054 only
- As well as the side braces attach front and rear beam (single tab) exactly
half way up the frame, front and back (See fig.3B).
8.
Insert the remaining cross beams in the frame using fig.4 and fig.5 to space them out
correctly. Ensure the beams are the correct way around to hold the wire shelves (See
fig.4, fig.5). As before use a soft faced mallet to tap the beams into place.
9.
Starting at the bottom place the wire shelves into the frame ensuring the shelves for
the larger bins are at the bottom and the shelves for the smaller bins are at the top.
10.
Place the flat wire shelf on the top. the storage system is now ready to use.
Fig.1