11/20
Product Code: 2103T
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
STANDARD OPERATING PROCEDURE
DO NOT
use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
PRE-OPERATIONAL SAFETY CHECKS
•
Keep motorcycle lifter in good working order, follow lubricating and changing accessories instructions
•
Do not exceed the safe working capacity of 680kg.
•
Do not make any modifications to the lift. Doing so may results in injury.
•
Use this lift for lifting purpose only.
•
Keep work area clean, free from hazards and well lit.
•
Only use the motorcycle lifter for its intended purpose.
•
Wear the correct PPE clothing.
•
Do not overreach, keep proper footing and balance at all times while operating the motorcycle lifter
•
Use only on hard level surfaces capable of sustaining the load.
•
Ensure that risk assessment has been read.
•
Faulty equipment must not be used. Immediately report suspect equipment.
OPERATIONAL SAFETY CHECKS
•
Before lifting motorcycle ensure the weight of the motorcycle has been full supported by the lift platform
•
Do not put the rear wheel of the motorcycle on the leading plate.
•
Do not use the leading plate to support the weight of the motorcycle when lifting. The leading plate is only used to assist
with wheeling the motorcycle onto the platform when the lift is as its lowest level
•
Ensure the motorcycle is adequately secured to the lifting platform with appropriate straps
•
Ensure the locking bar is engaged once the platform has been raised to the correct working height to prevent accidental
lowering
•
Before lowering the motorcycle lift ensure there are no obstructions underneath and all persons are standing clear
•
Do not attempt to transport load on the lift. The lift must only be used in the static position.
INTENDED USE
Lifts motorcycles, ATV's, ride-on mowers and snowmobiles for servicing, repair work and new vehicle preparation.
Safety glasses must be worn when operating this
equipment
Long loose hair must be contained when operating
this equipment
Safety footwear must be worn when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
