Product Code: 2037T
Made in China to TQB Brands Pty Ltd specifications
Page 5
Visit us at www.tqbbrands.com.au
6.
MAINTENANCE
Check all fittings are tight before each use.
Lubricate all joints and moving parts with light oil at regular intervals.
Always keep the press clean, dry, and protected from harsh conditions.
Regularly check the hydraulic oil level by removing the oil filler nut on top of the reservoir. Should you need to top up or replace the
oil ensure you use good quality hydraulic jack oil. Then replace and tighten the oil filler nut. NOTE an excess of oil will render the press
inoperative.
Use only appropriate good quality hydraulic jack oil. DO NOT use brake fluid. Contact your local distributor for details.
Always purge the system to remove any air.
7.
SERVICE & REPAIR
Any Hydraulic Workshop Press found damaged in any way, or found to be worn or operates abnormally should be removed from service
until repaired by an authorised service agent. Owners and / or operators should be aware that repair of this product may require specialised
equipment and knowledge. Only authorised parts, labels and decals shall be used on this equipment. Annual inspection of the Hydraulic
workshop press is recommended and can be made by an authorised repair facility to ensure that your equipment is in optimum condition
and that the equipment has the correct decals and safety labels specified by the manufacturer.
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Base cross legs
2
24
Pulley
1
2
Stabiliser plates
4
25
Heel Block
2
3
Main Post Uprights
2
26
Ram Unit
1
4
Bottom Brace Plates
2
27
Upper Brace Plates
2
5
Bed Frame Pins
2
28
Pump Handle
4
19
Winch
1
29
Hydraulic Pump
1
23
Bed Frame
1
39
Pressure Gauge
1
