Product Code: 1070T
Page 3
SAFETY INSTRUCTIONS
SAFETY OPERATNG INSTRUCTIONS
-
Inspect the Hydraulic Workshop Press before each use. Do not use if bent, broken,
cracked, leaking or otherwise damaged. Ensure all bolts and nuts are firmly tightened.
-
Do not exceed the products rated maximum load capacity. Never apply excessive force to
a work piece.
-
Steel and other materials can shatter, always wear approved impact goggles, heavy duty
work gloves and appropriate clothing.
-
If you detect anything that may indicate imminent structural failure, stop using the
hydraulic bench press immediately and inspect thoroughly.
-
Only use this hydraulic bench press on a surface that is stable, level, dry and non-slippery,
and capable of sustaining the load. Keep the surface clean, tidy and free from unrelated
materials and ensure that there is adequate lighting.
-
Do not use this hydraulic bench press to compress springs or any other item that could
disengage and cause a potential hazard.
-
Keep hands and feet away from bed area at all times.
-
Do not modify any component of this equipment.
-
Only use this device for the purpose for which it has been designed.
-
When servicing, use only Tradequip identical replacement parts. Use of any other parts
will void the warranty.
-
Use the right product for the job. There are certain applications for which the Hydraulic
bench press was designed. Do not modify the Hydraulic bench press and do not use the
Hydraulic bench press for a purpose for which it was not intended.
