10/21
Product Code: 1035T
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
This TradeQuip
"Made for the Trade"
Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still
delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 23,000 cubic
metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not
crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce
ambient temperatures by up to 10°C. Adjustable swing louvre feature that offers swinging airflow and allows you to adjust
the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of
water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling
properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy
savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for
area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
2.
BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as cracked joins and damaged, loose,
or missing parts.
The cooler is a high-tech product, showing simplicity and outstanding reliability, due to its European design origin.
Its working principle is that water evaporation uses up the surrounding heat and causes the temperature to cool down.
When water is continuously distributed onto the cooling pad surface, the air being drawn through the pad causes the water
to evaporate, making the air cooler and fresher.
The circulating water moves down to the reservoir, where it is again pumped up by the water pump. If the hose option is
being used, a float valve keeps the reservoir full continuously. If filled manually, the big 100 Litre capacity reservoir ensures
hours of uninterrupted operation. There is level indicator to quickly check the amount of water remaining.
3.
OPERATION
•
Temperature: 18°C to 45°C; Water temperature: <45°C.
•
Power supply must not exceed the required voltage (+/-) 5%.
•
Air supply must be largely free of dust or extra cleaning is required.
Control Panel
Remote Control
Keypad Control Panel
Keypad Instructions
ON/Off
This turns the cooler ON or Off
COOL
This activates the cooling function. Note that there is a delay of 1 minute before the fan starts
while the cooling pads become wet
SPEED
Pressing SPEED will select low, medium or high fan speed
SWING
This activated/deactivates SWING function
TIMER (Delayed Start)
The TIMER setting can be used to start the cooler after a certain number of hours delay. When
the Green POWER light is on, press TIMER until the number of hours delay (1-24) is shown.
TIMER (Automatic Stop) When the cooler is in operation, press the TIMER to set the number of hours (1-24) until the
machine will automatically switch off.
WATER Supply
Use only clean, fresh water. Pour water into the water inlet on the right hand side of the unit
(max 100L). Alternatively, attach a hose to the water inlet on the left side for automatic filling.
Note
: A pressure reducing valve is recommended for high pressure water supplies.
